LocationLab Pairing Assistant for Windows 0.1.0 (3)
===================================================

繁體中文
--------
系統需求：Windows 10/11 x64、Apple Devices、已開啟開發者模式的 iPhone，以及可傳輸資料的 USB 線。

1. 請先從 Microsoft Store 安裝並開啟 Apple Devices。
2. 將 ZIP 完整解壓縮；請勿只移動其中一個 EXE。
3. USB 接上並解鎖 iPhone，在 iPhone 與 Apple Devices 核准「信任」。
4. 開啟 LocationLab-Pairing-Assistant.exe。
5. 按「檢查裝置」，確認開發者模式已開啟。
6. 按「建立 LocationLab 配對檔」。若 DDI 尚未掛載，工具會下載固定版本的 Developer Image，先檢查大小與 SHA-256，再使用。
7. 新檔會儲存在 Windows 的「下載」資料夾。請只將它移至同一支 iPhone，再由 LocationLab 匯入。

重要：配對檔是敏感的裝置信任資料。請勿上傳、寄信、放進公開雲端硬碟、傳給支援團隊或分享給他人。再次建立配對檔可能讓舊檔失效，請在 LocationLab 匯入最新檔案。

Windows 試行版尚未簽署 Authenticode，SmartScreen 可能顯示警告。請只從 https://www.abram-studio.com/locationlab/ 下載，並核對網頁公布的 SHA-256。此版本已完成交叉編譯與靜態檢查，但尚待第一組實體 Windows PC／iPhone 驗證。

English
-------
Requirements: Windows 10/11 x64, Apple Devices, an iPhone with Developer Mode enabled, and a data-capable USB cable.

1. Install and open Apple Devices from the Microsoft Store.
2. Fully extract the ZIP. Do not move either EXE by itself.
3. Connect and unlock the iPhone over USB, then approve Trust on the iPhone and in Apple Devices.
4. Open LocationLab-Pairing-Assistant.exe.
5. Click Check device and confirm that Developer Mode is enabled.
6. Click Create LocationLab Pairing File. If the DDI is not mounted, the utility downloads a pinned Developer Image and verifies exact sizes and SHA-256 values before use.
7. The new file is saved in Windows Downloads. Move it only to this same iPhone, then import it in LocationLab.

Important: a pairing file is sensitive device-trust material. Never upload it, email it, place it in public cloud storage, send it to support, or share it. Creating another pairing file may invalidate the old file, so always import the newest file into LocationLab.

This initial Windows pilot is not Authenticode-signed, so SmartScreen may warn. Download it only from https://www.abram-studio.com/locationlab/ and verify the published SHA-256. Cross-compilation and static checks have passed; the first physical Windows PC/iPhone validation is still pending.
