LocationLab Developer Mode Assistant for Windows 0.1.0 (3)
============================================================

繁體中文
--------
系統需求：Windows 10/11 x64、Apple Devices，以及可傳輸資料的 USB 線。

1. 請先從 Microsoft Store 安裝並開啟 Apple Devices。
2. 將 ZIP 完整解壓縮；請勿只移動其中一個 EXE。
3. 以 USB 接上並解鎖 iPhone，在 iPhone 與 Apple Devices 核准「信任」。
4. 開啟 LocationLab-Developer-Mode-Assistant.exe。
5. 按「在 iPhone 顯示開發者模式」。
6. 回到 iPhone：設定 → 隱私權與安全性 → 開發者模式。
7. 由你本人打開開關、允許重新啟動，並在開機後確認。

此工具只要求 iOS 顯示設定選項，不會替你開啟開發者模式、略過重新啟動或代替確認。它不建立配對檔，不傳送 analytics，也不上傳任何裝置資料。

Windows 試行版尚未簽署 Authenticode，SmartScreen 可能顯示警告。請只從 https://www.abram-studio.com/locationlab/ 下載，並核對網頁公布的 SHA-256。此版本已完成交叉編譯與靜態檢查，但尚待第一組實體 Windows PC／iPhone 驗證。

English
-------
Requirements: Windows 10/11 x64, Apple Devices, and a data-capable USB cable.

1. Install and open Apple Devices from the Microsoft Store.
2. Fully extract the ZIP. Do not move either EXE by itself.
3. Connect and unlock the iPhone over USB, then approve Trust on the iPhone and in Apple Devices.
4. Open LocationLab-Developer-Mode-Assistant.exe.
5. Click Show Developer Mode on iPhone.
6. On the iPhone, open Settings > Privacy & Security > Developer Mode.
7. Enable it yourself, allow the restart, and confirm after startup.

This utility only asks iOS to reveal the setting. It cannot enable Developer Mode, bypass the restart, or approve the final confirmation. It creates no pairing file, sends no analytics, and uploads no device data.

This initial Windows pilot is not Authenticode-signed, so SmartScreen may warn. Download it only from https://www.abram-studio.com/locationlab/ and verify the published SHA-256. Cross-compilation and static checks have passed; the first physical Windows PC/iPhone validation is still pending.
